Basic PLC Ladder Programming Examples 17

Basic PLC Ladder Programming Training Examples for Beginners.
 Hi friends here we are starting here a series of Free Training on PLC Ladder Programming training & tutorials.These PLC Ladder Programs are important to get basics of Ladder programs.

 PLC Ladder Practice Problem: 

When the Start push button is pressed both motors must run
After 10 Sec motor 1 Stops Motor 2 continues running for another 5 sec and stops At this point a lamp is switched on. After 10 Seconds Lamp goes off and cycle restarts .
If stop switch is operated at any time , the system will continue to the end of the cycle and then stop.

Topics Covered in this example is Conditional Contacts  Ladder Program.

Number of PLC Inputs Required

X0 – START pushbutton to Start Motor

X1 – STOP pushbutton to Stop Motor

Number of PLC Outputs Required
Y0 – Motor 1
Y1 – Motor 2

PLC Ladder Programming:

Note: Example is only for training purposes. No practical implementation is done.

 See More PLC Ladder Programming Examples

Post a Comment

Hubert Morgan said... 4 December 2016 at 18:44

Nice sharing and so many example to refer, any PLC programming training to recommend?